Flow Rate 0.2-30 liters/minute

 The era of samplings with long interminable settings can be considered over with the new AirCube™ COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process.

The times of manual By-Pass or inaccurate and impractical calibrated orifices for high and low flows are over. You just need to set the desired flow and then let the sampling begin.

With the flow range included among 0.4 and 30 liters per minute in a single dynamic scale, the AirCube™ COM2 TH has no competitors! The first and only ultra compact The AirCube™ COM2 TH sampler is the true compact in the category with only 24 cm (per side) and 27 cm (height) but with inside the dry volumetric counter as required by the most common current norms.

Unique in its category, equipped with a membrane pump powered by 12V DC elevated flow range and back pressure compensation over 2200mm/H20.

Features:

• Light, compact, weight not over 8.0 Kg
• Usability flow range among 0.4 and 30 liters/minute with a single dynamic cycle
• No useless adapter for working at low flow rates
• Long-lasting battery pack guaranteeing extended sampling sessions
• Pump to a single head membrane
• Volumetric counter incorporated as required by the current regulations
• Flow reading with Mass Flow Meter and with data integration
• Compliant with the norms: RoHs-2006 and the UNI-EN.12919:2001

Additional features:

- Flow adjustment range 0.2-30 liters/minute
- Maximum operational flow 28 liters/minute (tested with 47 mm Fiberfilm filter 1800 mm/H20)
- Maximum attainable compensation: 2200 mm/H20
- Controlled electronic compensation of loss of load
- Single head membrane aspiration pump
- Pulse attenuator with pressure control incorporated
- Automatic flow regulation of the aspiration flow with patented proportional valve
- Sampling time and volume setting directly from the keyboard
- Sampling flow setting directly from keyboard
- Instantaneous detection and calculation of the average for:
- Dry gas meter temperature
- Environment temperature
- Atmospheric barometric pressure
- Aspiration flow
- Wind speed and direction (when the sensor has been installed)
- Graphic viewing of the sampling progress with calculation of the standard deviation
- Remote control by way of GSM/GPRS data card chance (Optional)
- Sequential group management with solenoid valves for particles and gas chance
- Total volume detectable from the integrated volumetric counter
- Setting of the standardization temperature chance
- PC board conformed to the RoHS-2006 norm requirements
- Conforms to the EN-12919:2001 norm
- Dual power feed with rechargeable batteries or with 220V standard network electrical power without external power packs or transformers

Physical Features
- Weight 8 Kg.
- Dimensions: 245x245x270 mm (LxDxH)
- EC Conformity on Electromagnetic Compatibility 89/336/EEC referred to the EN 50081-1, EN 6111- 6-2, EN 55014-1, EN 61326-1 end EN 60204-1:1997-12 norms regarding electrical safety tests of the device
- 12V DC power feed with Power Pack Com battery pack (Optional 600/ PP014A3COM2)
- Electrical power feed from the 220V / AC network with standard cable

Download Brochure for further details